ICOM IC 751 HF 100 W

 400.00

Apparato gia provvisto di scheda memoria non volatile

1 disponibili

Categoria:

Descrizione

Amateur HF transceiver
Frequency range: TX: 10-160 m + WARC
RX: 0.1-30 MHz
Tuning steps: 10 Hz, 1 KHz
Frequency stability: Less than ±500 Hz @ 0 to 50°C (32 to 122°F)
Mode: AM / FM / SSB / CW / RTTY
Channels / memory management: 32 regular
2 scan edge
RAM board with lithium battery backup
Repeater shift / offset: No dedicated, use VFO A/B split (“Duplex”)
Power supply: 13.8 VDC ±15% (Mains option)
Current drain / power consumption: RX: 1.5 A (Squelched)
TX: Max 20 A
Antenna impedance / connector: 50 ohm / SO-239
Dimensions (W*H*D): 306*115*355 mm (12.05*4.53*13.98″)
Weight: 8.5 Kg (18.74 lb)
Other features: PBT. NB. VOX. SWR-meter. CI-IV computer control.
RECEIVER SECTION
Receiver system: Triple conversion superheterodyne (FM)
1st IF: 70.45 MHz
2nd IF: 9.01 MHz
3rd IF: 455 KHz
Quadruple conversion superheterodyne (SSB/CW/RTTY)
1st IF: 70.45 MHz
2nd IF: 9.01 MHz
3rd IF: 455 KHz
4th IF: 350 KHz
Sensitivity: AM (10 dB S/N)
0.1-0.5 MHz: 3 uv
0.5-1.6 MHz: 6 uV
1.6-30 MHz: 1 uV
FM (12 dB SINAD)
1.6-30 MHz: 3 uV
SSB/CW/RTTY (10 dB S/N)
0.1-0.5 MHz: 0.5 uV
0.5-1.6 MHz: 1 uV
1.6-30 MHz: 0.15 uV
Selectivity: AM
2.4 KHz (-6 dB)
4.2 KHz (-60 dB)
FM
15 KHz (-6 dB)
30 KHz (-60 dB)
SSB/CW/RTTY
2.3 KHz (-6 dB)
4 KHz (-60 dB)
Image rejection:
AF output power / speaker: 3 W at 10% distortion / 8 ohm
External speaker connector: 3.5 mm
TRANSMITTER SECTION
RF output power:
Pwr
AM: 10-40 W
FM: 10-100 W
SSB (PEP): 10-100 W
CW/RTTY: 10-100 W
Modulation system:
Max FM deviation (Factory set): ±5 KHz
Spurious emissions: Better than -60 dB
Microphone impedance / connector: 600 ohm / 8-pin (Metal locking ring connector)
Microphone input level: ~12 mV (Typical)
MISCELLANEOUS
Manufactured: Japan, 1983-1984 (Discontinued)